| Specification | MegaRAID SAS 9341-8i | MegaRAID SAS 9341-4i |
|---|---|---|
| Provided Solution | Low-cost, green SATA+SAS RAID solution | Low-cost, green SATA+SAS RAID solution |
| Suitable for high-density servers and workstations | Suitable for high-density servers and workstations | |
| Supports simultaneous use of SATA and SAS HDDs/SSDs | Supports simultaneous use of SATA and SAS HDDs/SSDs | |
| Physical Dimensions | 9341-8i: 2.6" x 6.0" | 9341-4i: 2.6" x 6.0" |
| Connections | 9341-8i: Two x4 SFF-8643 Mini SAS HD horizontal connectors | 9341-4i: One x4 SFF-8643 Mini SAS HD horizontal connector |
| Maximum Physical Devices | Non-RAID (JBOD) mode: 64 | RAID 0: Up to 32 drives per volume |
| RAID 1: Up to 2 drives per volume plus hot spare | RAID 5: Up to 32 drives per volume | |
| RAID 10: Up to 32 drives per volume | RAID 50: Up to 32 drives per volume | |
| Host Bus Type | 8-lane, compliant with PCI Express 3.0 at 5 GT/s | 8-lane, compliant with PCI Express 3.0 at 5 GT/s |
| Data Transfer Rate | Up to 12 Gb/s per port | Up to 12 Gb/s per port |
| Key RAID Data Protection Features | RAID levels 0, 1, 5, 10, 50, and JBOD mode | RAID levels 0, 1, 5, 10, 50, and JBOD mode |
| Online Capacity Expansion (OCE) | Online Capacity Expansion (OCE) | |
| Online RAID Level Migration (RLM) | Online RAID Level Migration (RLM) | |
| Automatic rebuild or RLM after power loss during array recovery | Automatic rebuild or RLM after power loss during array recovery | |
| Single-controller multipath (load balancing) | Single-controller multipath (load balancing) | |
| Hot plug drive support | Hot plug drive support | |
| Drive roaming | Drive roaming | |
| Selectable logical drive as boot drive | Selectable logical drive as boot drive | |
| Virtual Disk (VD) consistency check | Virtual Disk (VD) consistency check | |
| Quick Initialization for fast array setup | Quick Initialization for fast array setup | |
| Disk spin-down | Disk spin-down | |
| Hot spare support (up to 8 drives) | Hot spare support (up to 8 drives) | |
| Global, dedicated (copyback), enclosure-affiliated, and emergency SATA support | Global, dedicated (copyback), enclosure-affiliated, and emergency SATA support | |
| Automatic rebuild support | Automatic rebuild support | |
| Security storage encryption service for SED drives | Security storage encryption service for SED drives | |
| Shield State Drive Diagnostic Technology | Shield State Drive Diagnostic Technology | |
| Patrol read for media scan and repair | Patrol read for media scan and repair | |
| Online disk firmware update | Online disk firmware update | |
| Error recovery support | Error recovery support | |
| SAS TCQ support | SAS TCQ support | |
| SATA NCQ support | SATA NCQ support | |
| Native 4K drive support | Native 4K drive support | |
| Non-disk device support | Non-disk device support | |
| >2TB logical drive support | >2TB logical drive support | |
| Soft bad block management | Soft bad block management | |
| DDF-compliant disk configuration | DDF-compliant disk configuration | |
| External configuration import | External configuration import | |
| Shingled Magnetic Recording (SMR) support | Shingled Magnetic Recording (SMR) support | |
| SES (in-band) and SGPIO (sideband) management | SES (in-band) and SGPIO (sideband) management | |
| MegaRAID Management Suite | MegaRAID Storage Manager™, StorCL (command-line interface), CTRL-R (BIOS configuration utility), HII (UEFI Human Interface Infrastructure) | MegaRAID Storage Manager™, StorCL (command-line interface), CTRL-R (BIOS configuration utility), HII (UEFI Human Interface Infrastructure) |
| Environment | Operating Temperature: 0°C to 70 |
To obtain the driver, please visit https://www.stesz.com/index.php/en/support/driver.html
Botong MegaRAID SAS-9380-8i8e provides high performance and higher throughput for external JBOD storage enclosures through internal and external connections
Broadcom MegaRAID SAS-9361-24i uses a high-end port count of 12Gb/s SATA+SAS-PPCIe RAID controller to release storage performance.
Botong Super RAID SAS-9361-16i configuration requires high-density servers with flexibility and scalability in the chassis design
Broadcom MegaRAID SAS 9380-8e is designed specifically for large-scale and enterprise data centers that require external JBOD storage with advanced data protection capabilities